Inter-Tech X-908 Infini2 Tower Black

An infinity mirror illuminated by RGB LEDs on the front, an RGB LED strip in the power supply tunnel and three 120mm RGB fans make the X-908 Infini2 a real eye-catcher. The tempered glass front and 4 mm thick tempered glass side panel offer a generous view of powerful effects and colours, which can be managed with a front switch or via the 5V RGB header connector (addressable RGB LEDs).

The X-908 Infini2's easily accessible control panel is equipped with HD audio jacks, two USB 3.0 Type A and two additional USB 3.0 Type C ports. Two separate switches offer the option of manual fan control at three levels (Low, High and Stop). The on and off buttons are slightly recessed to prevent accidental operation in the dark.

The tempered glass of the front panel provides the backdrop for the infinity mirror, offering a glimpse into the depths of the optical illusion. Another highlight is the 4 mm thick tempered glass side panel, which forms the backdrop for the installed hardware. With the RGB LED switch on the side, you can easily and conveniently switch through all the pre-programmed effects and colours. With the 3-pin RGB header connection for 5V RGB mainboard controllers and suitable mainboard software, all RGB LEDs can also be controlled individually (addressable RGB LEDs).

The housing cover has a large dust filter that protects the inside of the housing from dust. The dust filter is removed with two simple clicks and can be cleaned easily and quickly.

Three standard 120mm RGB LED fans not only set the tone for the interior, but also provide clean and cool air for the installed components. The effects of the fans can be controlled via the built-in RGB LED switch or via the 3-pin RGB header connector for 5V RGB mainboard controllers, synchronised with the RGB LEDs on the front and above the power supply tunnel.

Behind the motherboard carrier is the heart of the X-908 Infini2 - the RGB/PWM board. All installed RGB LEDs, such as the RGB LEDs of the fans, the RGB LEDs of the bar above the power distribution tunnel or the RGB LEDs of the Infinity front panel, are controlled synchronously via the board. In addition, up to five 3-pin fans can be connected there, all of which can be controlled for speed via the motherboard's PWM connection. Two installation slots for 2.5" SSDs are located on the back of the motherboard carrier.